Coverage: Nickel Alloys, Stainless Steel, and Related Raw Materials
Sources: SMM, Mysteel, Japan's Ministry of Finance, India's Ministry of Steel, the European Commission, LME, and other publicly available industry data and market reports
China's Stainless Steel Output: Slight Decline in October, with a More Pronounced Contraction in 300 Series
According to Mysteel, 43 Chinese stainless steel producers scheduled a total crude stainless steel output of 3.514 million tonnes in October 2026, down 1.16% month-on-month but up 0.01% year-on-year.
By series:
300 Series: 1.8028 million tonnes, down 6.22% month-on-month
200 Series: 1.0824 million tonnes, up 5.79% month-on-month
400 Series: 628,800 tonnes, up 3.15% month-on-month
Overall production plans declined slightly, with a notable contraction in the 300 series. This reflects weak downstream demand and divergent production adjustments among stainless steel mills.
Nickel Ore Supply: Indonesia Raises Quotas, Easing Tightness in the Mining Sector
Following revisions to Indonesia's 2026 RKAB approvals, the country's total approved nickel ore production quota reached approximately 290 million tonnes, up around 30 million tonnes from the initial allocation of 260–270 million tonnes earlier in the year.
The CIF price of Indonesian 1.6% grade laterite nickel ore has fallen by more than 25% from its annual peak, indicating a significant easing of supply tightness compared with the first half of the year.
Leading Steelmakers Adjust Production Mix to Control Raw Material Costs
Jiuquan Iron & Steel (JISCO) stated that, amid weak traditional downstream stainless steel consumption and fluctuating export demand since September, it would optimize production schedules across martensitic, ferritic, and austenitic stainless steel grades.
Liuzhou Iron & Steel's Zhongjin subsidiary has reportedly converted its 1,680 m³ blast furnace from stainless steel production to a low-nickel pig iron route. The adjustment is expected to reduce nickel-related raw material costs by approximately 8–12% per tonne of stainless steel.
Downstream Demand: Traditional Consumption Remains Weak, with Limited Industrial Growth
Traditional consumer sectors, including tableware, kitchenware, and household appliances, continue to experience sluggish demand. Industrial stainless steel consumption remains relatively stable, but incremental growth is limited.
Purchasing activity in the new energy ternary cathode material sector is also weak, providing insufficient support for rigid nickel demand.
Higher Indonesian nickel ore quotas and declining raw material prices have lowered the cost base. However, contracting 300 series production and weak traditional consumption indicate that neither supply nor demand has achieved a meaningful recovery. Stainless steel prices are therefore expected to remain under downward pressure, with a predominantly weak and range-bound outlook.
Policy 1: Japan Imposes Final Anti-Dumping Duties on Nickel-Containing Cold-Rolled Stainless Steel from China
Authority: Japan's Ministry of Finance
Announcement Date: October 27, 2026
Key Provisions
Japan has imposed final anti-dumping duties on nickel-containing cold-rolled stainless steel coils, sheets, and strips originating from mainland China and Taiwan, China, for a five-year period from October 31, 2026, to October 30, 2031. The final measures replace the provisional duties introduced on July 9, 2026.
The products concerned generally contain at least 10.5% chromium and more than 0.6% nickel, primarily covering the 300 series.
| Origin | Selected Producers / Exporters | Duty Rate |
|---|---|---|
| Mainland China | Shanxi Taigang, Guangdong Yongjin, Jiangsu Yongjin, Shanghai Shida, Ningbo Baoxin, and others | 27.7% |
| Mainland China | Other producers and exporters | 42.1% |
| Taiwan, China | YUSCO and five other designated companies | 3.6% |
| Taiwan, China | Other producers and exporters | 20.1% |
Market Implications
The final duties will significantly increase the landed cost of affected cold-rolled stainless steel products entering Japan. Exporters should reassess order profitability, review pricing strategies, and explore alternative destination markets.
Policy 2: EU Proposes to Maintain Anti-Dumping Duties on Hot-Rolled Stainless Steel from Indonesia, China, and Taiwan
Authority: European Commission
Disclosure Date: October 21, 2026
Key Provisions
The European Commission released a general disclosure document under the expiry review of anti-dumping measures on hot-rolled stainless steel. It proposes maintaining the existing anti-dumping duties on hot-rolled stainless steel coils originating from Indonesia, China, and Taiwan, China, for another five years.
The formal implementing regulation has yet to be published.
Market Implications
The proposed extension would further restrict Asian stainless steel exports to Europe, adding to existing barriers affecting cold-rolled products. Together with ongoing reviews and import quota restrictions, the European market is unlikely to see a meaningful relaxation of trade barriers in the near term.
Policy 3: India's Stainless Steel Flat Product QCO Exemption Expires Without Extension
Authority: India's Ministry of Steel
Key Provisions
The temporary exemption from Quality Control Orders (QCOs) covering stainless steel flat products under IS 6911, IS 5522, IS 15997, and IS 14650 expired on October 26, 2026. No extension has been announced as of the reporting date.
Shipments made after the exemption period must once again comply with applicable BIS certification requirements.
Market Implications
During the exemption period, imports of stainless steel flat products from China increased significantly. Jindal Stainless reported that Chinese imports in July were approximately 2.9 times its average monthly import volume in the previous fiscal year.
Following the expiration of the exemption, products without the required BIS certification may face export and customs clearance restrictions. Exporters serving the Indian market should verify applicable certification requirements and review arrangements for cargo already in transit.
Policy 4: Vietnam Accepts Anti-Dumping Petition on Cold-Rolled Stainless Steel
Authority: Vietnam's Trade Remedies Authority
Key Developments
Vietnam has accepted an anti-dumping petition concerning cold-rolled stainless steel products originating from mainland China, Indonesia, and Taiwan, China.
The application was confirmed as complete on September 29. The authorities will assess whether to initiate a formal investigation within the prescribed review period, with further developments expected around mid-November.
At this stage, the petition should not be interpreted as a formal investigation or an implemented anti-dumping measure.
Market Implications
If a formal investigation is initiated, uncertainty surrounding the entry of certain Asian cold-rolled stainless steel products into Vietnam will increase.
Given existing trade restrictions in Japan and Europe, Vietnam's policy developments warrant close monitoring. However, it is premature to conclude that the Vietnamese export channel has already been closed.
Cost Side: Neutral to Moderately Favorable
Higher Indonesian nickel ore quotas, declining ore prices, and lower sulfur prices are contributing to a downward shift in the nickel raw material cost base.
However, the estimated profit margin for refined nickel production using externally sourced MHP remains around -5.8%, with ongoing losses providing some support against further nickel price declines.
Supply and Export Side: Increasingly Restrictive Overseas Market Access
Japan's final anti-dumping duties on Chinese 300 series cold-rolled stainless steel took effect on October 31, 2026, for a five-year period.
The EU proposes extending anti-dumping duties on hot-rolled stainless steel for another five years, maintaining barriers to Asian flat steel exports.
India's QCO exemption for stainless steel flat products has expired. Products that do not meet applicable certification requirements may face export and customs clearance restrictions.
In late October, Shanghai nickel futures fluctuated within a range of approximately RMB 115,000–124,000 per tonne.
On October 16, prices touched an annual low of RMB 114,610 per tonne. A subsequent rebound, driven by rumors of production cuts in Indonesia, pushed prices to RMB 123,690 per tonne before retreating to RMB 120,580 per tonne on October 23.
Shanghai nickel closed at RMB 117,970 per tonne on October 27.
Rumors of coordinated production cuts in Indonesia briefly boosted nickel prices. However, a survey by Cailian Press on October 23 found that most companies denied participating in such cuts, causing expectations of supply reductions to fade rapidly.
Meanwhile, the increase in Indonesia's RKAB quota to approximately 290 million tonnes and declining nickel ore prices reinforced the prevailing outlook for relatively ample supply.
| Indicator | Latest Data | Market Significance |
|---|---|---|
| Indonesian 1.6% grade laterite nickel ore CIF price | USD 57.1/wet tonne as of October 29 | Down from USD 63.4/wet tonne, more than 25% below the annual peak |
| Indonesian sulfur import price | Approximately USD 875/tonne | Down from above USD 1,100/tonne in June |
| Profit margin for refined nickel produced using externally sourced MHP | Approximately -5.8% | Persistent production losses provide some cost-side support |
| Indonesian nickel ore benchmark price (HMA) | USD 15,847.67/tonne in the second half of October | Down 2.91% from the first half of the month |
Lower mining costs are exerting downward pressure on nickel prices. However, nickel ore prices do not directly determine finished nickel alloy quotations.
Pricing for nickel alloy products should also account for refined nickel and other alloying element prices, processing costs, product specifications, and order conditions.
In late October, the December 2026 stainless steel futures contract (SHFE 2612) traded within a range of RMB 13,390–13,575 per tonne.
Although nickel ore and other raw material costs declined, stainless steel prices adjusted more slowly. Profitability for 300 series stainless steel producers improved temporarily.
However, limited visibility into downstream orders continued to constrain restocking activity among steel mills and traders.
| Factor | Price Impact | Explanation |
|---|---|---|
| Increase in Indonesia's RKAB quotas | Downward pressure | Expectations of greater ore availability and lower production costs |
| Production cut rumors denied by companies | Downward pressure | Coordinated cuts appear difficult to implement, leaving supply relatively ample |
| Japan's final anti-dumping duties | Negative for stainless steel exports | Five-year duties on Chinese nickel-containing cold-rolled stainless steel |
| EU proposal to extend hot-rolled anti-dumping duties | Negative for stainless steel exports | Continued barriers to Asian hot-rolled flat products entering Europe |
| Expiration of India's QCO exemption | Negative for stainless steel exports | Products lacking applicable certification may face export and customs restrictions |
| Persistent losses in refined nickel production | Supportive of nickel price stabilization | Higher cost-side support, but not a guarantee of price increases |
| Continued destocking of SHFE nickel inventories | Supportive of nickel prices | Weekly inventory decline of 1,160 tonnes, marking 11 consecutive weeks of reductions |
Japan's final anti-dumping duties, the EU's proposed extension of hot-rolled duties, and the expiration of India's QCO exemption point to a common development: major export destinations for Asian stainless steel flat products are tightening market access simultaneously.
Combined with the EU's previously implemented cast-origin documentation requirements, exporters are facing multiple overlapping trade barriers rather than restrictions in a single market.
This is likely to accelerate the restructuring of export flows toward Southeast Asia, the Middle East, Africa, and other markets not directly affected by these measures.
Higher Indonesian nickel ore quotas, declining ore prices, and lower sulfur prices are reducing the nickel raw material cost base.
At the same time, persistent losses in refined nickel production are providing some resistance to further price declines.
Whether nickel prices can stabilize will depend on supply adjustments, inventory movements, and downstream demand. Cost support alone does not imply an immediate price recovery.
Despite declining nickel prices, orders for nickel-based alloys in aerospace, nuclear power, LNG storage and transportation, and other specialized industries have remained relatively stable.
Mysteel surveys indicate steady demand for high-temperature and corrosion-resistant alloys.
Products such as cast master alloys and grades including Inconel 713C, 718 and 625 demonstrate demand resilience that is relatively independent of short-term fluctuations in stainless steel and battery markets.
This segment may represent a structural growth opportunity for exporters, supported by specialized applications and performance requirements rather than broad commodity market movements.
Between October 19 and 23, Indonesian and Malaysian 304 cold-rolled stainless steel quotations remained at previously reduced levels, while delivered prices in Belgium declined by USD 15 per tonne.
During the same period, rumors of Indonesian production cuts triggered a single-day increase of approximately 3.05% in the Shanghai nickel benchmark contract.
However, overseas stainless steel quotations did not rise accordingly.
This divergence suggests that sentiment-driven rebounds in the raw material market have yet to translate into a meaningful improvement in end-user purchasing activity.
Over the next quarter, nickel and stainless steel markets are likely to be characterized by gradually emerging cost support, persistent export trade barriers, and accelerating adjustments in global market flows.
Nickel prices are already trading within a range where refined nickel production is broadly loss-making, potentially limiting further downside.
If nickel ore and sulfur prices stabilize, the cost floor may become increasingly evident. Export quotations may retain some flexibility, but a sustained downward pricing trend should not be assumed.
Trade restrictions affecting Japan, the EU, and India tightened simultaneously in late October.
Export opportunities for Chinese 300 series cold-rolled stainless steel to Japan, hot-rolled flat products to Europe, and stainless steel flat products to India are all facing greater pressure.
Companies exposed to these markets should accelerate the evaluation of alternative destinations and reassess their market allocation strategies.
High-end nickel alloys are relatively less exposed to the trade barriers currently affecting mainstream stainless steel products.
Inconel 625, Inconel 718, and other specialized alloy products remain worth monitoring as potential growth areas. However, commercial opportunities should be evaluated based on actual customer demand, technical requirements, and order conversion rather than market expectations alone.
This report is compiled from publicly available industry information and market data for reference purposes. Market conditions and regulatory developments are subject to change.
Ronsco is a trusted global supplier of nickel alloy and stainless steel welding wires, including Inconel, Hastelloy, and Monel series. Our products are manufactured to meet industry standards and are widely used in demanding applications such as aerospace, oil & gas, chemical processing, and power generation. Explore our resource center for the latest industry insights, product knowledge, and technical references.
Contact us for a quote or technical assistance.
