Product Blogs

AWS A5,14 vs ASME SFA 5,14,AWS A5,14,ASME SFA 5,14,nickel alloy welding wire standards

AWS A5.14 vs ASME SFA 5.14: Real Differences Explained

Date: 2026-11-18
Introduction

When specifying nickel alloy welding wires and filler rods, buyers may encounter both AWS A5.14 and ASME SFA 5.14. Although the designations are different, they refer to closely related specifications covering nickel and nickel-alloy bare welding electrodes and rods.

The main difference is that AWS A5.14 is published by the American Welding Society, while ASME SFA 5.14 is incorporated into the ASME Boiler and Pressure Vessel Code (BPVC). Their technical requirements are generally aligned, but the applicable editions and project requirements should be verified.

Key Differences Between AWS A5.14 and ASME SFA 5.14

AWS A5.14 is a standalone welding filler metal specification published by the American Welding Society (AWS). It establishes classification and technical requirements for nickel and nickel-alloy bare welding electrodes and rods.

ASME SFA 5.14 is the corresponding specification included in ASME BPVC Section II, Part C. It is referenced in applications where welding consumables must comply with ASME code requirements.

Item AWS A5.14 ASME SFA 5.14
Publishing organization American Welding Society (AWS) American Society of Mechanical Engineers (ASME)
Standard system AWS A5 series ASME BPVC Section II, Part C
Scope Nickel and nickel-alloy bare welding electrodes and rods Nickel and nickel-alloy bare welding electrodes and rods
Classification AWS filler metal classifications Corresponding SFA classifications
Typical application General industrial welding specifications ASME code-governed projects
Technical requirements AWS specification Based on the corresponding AWS specification

ASME SFA 5.14 is based on the corresponding AWS A5.14 specification. However, ASME and AWS publication schedules may differ, meaning their applicable editions are not necessarily identical.

For projects involving pressure vessels, boilers, or other code-regulated equipment, the required ASME edition should be confirmed rather than automatically applying the latest AWS edition.

Request a Quote for AWS A5.14 or ASME SFA 5.14 Welding Consumables!

Tell us your required alloy grade, specifications, and quantity. Ronsco supplies nickel alloy welding wires and filler rods for industrial applications.

Contact Us for a Quote
Are the Filler Metal Classifications the Same?

The corresponding filler metal classifications are generally the same under AWS A5.14 and ASME SFA 5.14.

For example:

Classification Common Alloy Typical Application
ERNiCr-3 Alloy 82 Nickel-chromium alloy welding and dissimilar metal welding
ERNiCrMo-3 Alloy 625 Welding Alloy 625 and related nickel-chromium-molybdenum alloys
ERNiCrMo-4 Alloy C-276 Welding Alloy C-276 and similar corrosion-resistant alloys
ERNiFeCr-1 Alloy 825 Welding Alloy 825 and related nickel-iron-chromium alloys

An ERNiCrMo-3 filler metal, for example, refers to the same general filler metal classification whether it is referenced under AWS A5.14 or ASME SFA 5.14.

The difference lies in the applicable specification and edition, not in the alloy name itself.

Which Specification Should You Use?

The specification you need depends on the welding requirements of your project.

  • AWS A5.14 is commonly specified for general industrial applications where nickel alloy welding consumables are required to meet AWS classification requirements.
  • ASME SFA 5.14 is typically referenced in projects governed by ASME construction codes, such as pressure vessels, boilers, and certain pressure piping applications.

If a project specification explicitly requires ASME SFA 5.14, buyers should confirm that the supplied material documentation meets the applicable ASME requirements.

Using a filler metal with an AWS classification does not automatically establish compliance with every requirement of an ASME construction code. Applicable code editions, welding procedure qualifications, and project-specific requirements must also be considered.

What Should Buyers Check When Purchasing Nickel Alloy Welding Wires?

When purchasing nickel alloy welding consumables, the standard designation is only one part of the specification. Buyers should also confirm:

  • Filler metal classification: ERNiCrMo-3, ERNiCr-3, ERNiCrMo-4, or another required grade.

  • Applicable standard: AWS A5.14, ASME SFA 5.14, or both.

  • Standard edition: Particularly important for ASME code-regulated projects.

  • Product form and dimensions: TIG filler rods or MIG welding wires, diameter, length, spool type, and packaging.

  • Material documentation: Chemical composition, material test certificates, and other documents required by the project.

Providing these details helps ensure that the supplied welding consumables match the technical requirements of the application.

FAQs About AWS A5.14 vs ASME SFA 5.14

1. Is AWS A5.14 the Same as ASME SFA 5.14?

They are closely related specifications covering nickel and nickel-alloy bare welding electrodes and rods. ASME SFA 5.14 is based on the corresponding AWS specification, although the applicable editions may differ.

2. Can AWS A5.14 Welding Wire Be Used for ASME Projects?

It may be acceptable depending on the applicable ASME code edition and project requirements. The filler metal classification, documentation, and relevant qualification requirements should be verified before use.

3. What Is the Difference Between AWS A5.14 and AWS A5.11?

AWS A5.14 covers nickel and nickel-alloy bare welding electrodes and rods, commonly used for TIG and MIG welding.

AWS A5.11 covers nickel and nickel-alloy covered electrodes used in Shielded Metal Arc Welding (SMAW), commonly known as stick welding.

The two specifications cover different welding consumable forms and processes.

Nickel Alloy Welding Consumables from Ronsco

Ronsco supplies nickel alloy welding wires and TIG filler rods for industrial applications, including various nickel alloy grades.

Whether your project specifies AWS A5.14 or ASME SFA 5.14, you can contact Ronsco with your required alloy classification, dimensions, quantity, and applicable standard to request a quotation.

Contact Ronsco for your nickel alloy welding consumable requirements.

About Ronsco

Ronsco is a trusted global supplier of nickel alloy and stainless steel welding wires, including Inconel, Hastelloy, and Monel series. Our products are manufactured to meet industry standards and are widely used in demanding applications such as aerospace, oil & gas, chemical processing, and power generation. Explore our resource center for the latest industry insights, product knowledge, and technical references.

Contact us for a quote or technical assistance.

Latest News

Get a Free Quote

Please feel free to send us your requirements or questions, we’ll reply within 24 hours.
We respect your privacy, all information is for business communication only.